ExtremeSwitching, Summit, and E4G Components: ExtremeXOS and Switch Engine Software Support

The following tables provide information about the minimum version of ExtremeXOS (EXOS) and Switch Engine software required to support Extreme Networks switches and routers.

Each hardware platform is supported for all software versions from the minimum version listed through the last supported version. When EXOS 16.x (or 22.x) is listed as the last supported version, the hardware platform is supported in all 16.x (or 22.x) versions, including the latest patch versions.

Exception: Hardware platforms that have reached End of Version Maintenance (EoVM) are not supported in patches released after their EoVM dates. A platform reaches EoVM 36 months after its End of Sale (EoS) date. For information specific to your hardware platform, see End of Sale and End of Service Life.

Note: The switch's BootROM is not automatically upgraded when software is upgraded. Make sure you are running the minimum required BootROM version. Use the download bootrom command to download a BootROM image.

 

Select a hardware platform

Universal hardware platforms 5320  5420   5520   5720

Platforms supported in EXOS 30.x, 31.x, and 32.x X435   X440-G2   X450-G2   X460-G2   X465   X590   X620   X670-G2 X690   X695   X870   V300   V400

Older platforms X430   X440   X450   X460   X480   X670   X770   E4G


 

5320 Switches: Software Support

The 5320 switch is also supported on Fabric Engine version 8.6 and later.
Table last updated 7 September 2022
5320 Series ComponentMinimum Software VersionLast Supported Software Version
5320-16P-4XESwitch Engine 31.7.1latest available
5320-16P-4XE-DCSwitch Engine 31.7.1latest available
5320-24T-8XESwitch Engine 31.6.1latest available
5320-24P-8XESwitch Engine 31.6.1latest available
5320-48T-8XESwitch Engine 31.6.1latest available
5320-48P-8XESwitch Engine 31.6.1latest available

5420 Switches: Software Support

Note: If your 5420F-48P-4XE or 5420M-48W-4YE switch’s manufacturing revision code is AC, you must install ExtremeXOS version 31.3.1.3-patch1-10 (or later). This limitation does not apply to other models of the 5420, and it does not apply to any manufacturing revision codes other than AC.
To find out if your 5420 switch is affected, issue the command show version. The two-digit manufacturing revision code appears in the first line of output (underlined in the following example):

5420-switch1 # show version
Switch : 801086-01-AC JA042138G-00071 Rev AC BootROM: 2.3.2.3 IMG: 31.3.1.3

The 5420 switch is also supported on VOSS versions 8.4 and 8.5, and on Fabric Engine 8.6 and later.
Table last updated 7 September 2022

5420 Series ComponentMinimum Software VersionLast Supported Software Version
5420F-48P-4XEEXOS 31.3.1 (see note above)latest available
5420M-48W-4YEEXOS 31.3.1 (see note above)latest available
all other 5420 switchesEXOS 31.3.1latest available

5520 Switches: Software Support

The 5520 switch is also supported on VOSS versions 8.2.5 through 8.5, and on Fabric Engine version 8.6 and later.

Table last updated 7 September 2022
5520 Series ComponentMinimum Software VersionLast Supported Software Version
all 5520 switch modelsEXOS 31.1.1latest available

5520 Switches: Software Support

The 5720 switch is also supported on Fabric Engine version 8.7 and later.

Table last updated 7 September 2022
5720 Series ComponentMinimum Software VersionLast Supported Software Version
all 5720 switch modelsSwitch Engine 32.1.1latest available

X435 Switches: Software Support

Table last updated 26 February 2020
X435 Series ComponentMinimum EXOS Software VersionLast Supported EXOS Software Version
all X435 switch models30.5.1latest available

X440 Switches: Software Support

Table last updated 29 July 2016
X440 Series ComponentMinimum EXOS Software VersionMinimum BootROM VersionLast Supported EXOS Software Version
X440-24t X440-24p15.1.12.0.1.616.x
X440-8t X440-8p X440-24t-10G X440-24p-10G X440-48t X440-48p X440-48t-10G X440-48p-10G15.1.22.0.1.616.x
X440-L2-24t X440-L2-48t15.2.12.0.1.716.x
X440-24tDC X440-24x X440-24x-10G X440-48tDC15.3.12.0.1.716.x

X440-G2 Switches: Software Support

Note: If your X440-G2 switch’s manufacturing revision code is 10 or greater (for 48-port 10GE4 models) or 08 or greater (for all other models), you must install ExtremeXOS version 21.1.1.4-patch1-5 (or later). This software version includes a flash storage driver that is compatible with the hardware revision.

To find out if your X440-G2 switch is affected, issue the command show version. The two-digit manufacturing revision code appears in the first line of output (underlined in the following example):

X440G2-switch1 # show version
Switch : 800615-00-08 1516G-01191 Rev 1.0 BootROM: 1.0.1.8 IMG: 21.1.2.6

All EXOS 16.2 images and all EXOS 22.x (or later) images already have the necessary driver support.

Table last updated 19 September 2016
X460-G2 Series ComponentMinimum EXOS Software VersionMinimum BootROM VersionLast Supported EXOS Software Version
X460-G2-48x-10GE4 X460-G2-24t-GE4 X460-G2-24t-10GE4 X460-G2-48t-GE4 X460-G2-48t-10GE4 X460-G2-24x-10GE4 X460-G2-24p-GE4 X460-G2-24p-10GE4 X460-G2-48p-GE4 X460-G2-48p-10GE415.6.1.41.0.2.1latest available
X460-G2-24t-24ht-10GE4 X460-G2-24p-24hp-10GE4 X460-G2-16mp-32p-10GE422.2.11.0.2.3latest available
VIM-2q VIM-2ss VIM-2t VIM-2x15.6.1.4N/Alatest available
TM-CLK Clock Module15.6.1.4N/Alatest available
X460-G2 Grounding LugN/AN/AN/A

X450 Switches: Software Support

Table last updated 8 August 2016
X450 Series ComponentMinimum EXOS Software VersionMinimum BootROM VersionLast Supported EXOS Software Version
X450-24t11.2.2.41.0.5.612.4.x
X450-24x11.6.1.91.0.2.212.4.x
XGM-2xn11.5.1.4N/A12.4.x

X450-G2 Switches: Software Support

Note: Newer X450-G2 models have an updated PoE controller that requires EXOS version 30.4.1 (or later). This applies to the following models:

X450-G2-24p-GE4-Base, X450-G2-24p-10GE4-Base, X450-G2-48p-GE4-Base, and X450-G2-48p-10GE4-Base with manufacturing revision code of 23 or greater
X450-G2-48p-10GE4-FB-1100-TAA, X450-G2-24p-GE4-FB-715-TAA, and X450-G2-24p-10GE4-FB-715-TAA with manufacturing revision code of 20 or greater
Note: Many X450-G2 models have an updated flash storage driver that requires either EXOS version 16.1.3.6-patch1-8 (or later) or version 21.1.1.4-patch1-5 (or later). This applies to all X450-G2 models with manufacturing revision code of 15 or greater.

To find out if your X450-G2 switch is affected, issue the command show version. The two-digit manufacturing revision code appears in the first line of output (underlined in the following example):

X450G2-switch1 # show version
Switch : 800601-00-15 1516G-01191 Rev 1.0 BootROM: 1.0.1.8 IMG: 21.1.2.6

Table last updated 30 March 2018
X450-G2 Series ComponentMinimum EXOS Software VersionMinimum BootROM VersionLast Supported EXOS Software Version
all X450-G2 switch models16.1.11.0.2.1latest available

X460 Switches: Software Support

Table last updated 8 August 2016
X460 Series ComponentMinimum EXOS Software VersionMinimum BootROM VersionLast Supported EXOS Software Version
X460-24t X460-24x X460-24p X460-48t X460-48x X460-48p12.5.12.0.1.016.x
SummitStack module SummitStack-V80 module12.5.12.0.1.016.x
XGM3-2sf12.5.1N/A16.x
XGM3S-2sf XGM3S-2xf XGM3SB-4sf15.1.1N/A16.x

X460-G2 Switches: Software Support

Note: Newer X460-G2 models have an updated PoE controller that requires EXOS version 30.4.1 (or later). This applies to the following models:

X460-G2-16mp-32p-10GE4-FB-TAA and X460-G2-16mp-32p-10GE4 with manufacturing revision code of 14 or greater
X460-G2-24p-24hp-10GE4-FB-TAA and X460-G2-24p-24hp-10GE4-Base with manufacturing revision code of 17 or greater
X460-G2-48p-GE4-FB-1100-TAA, X460-G2-48p-10GE4-FB-1100-TAA, X460-G2-24p-GE4-FB-715-TAA, and X460-G2-24p-10GE4-FB-715-TAA with manufacturing revision code of 22 or greater
X460-G2-48p-GE4-Base, X460-G2-48p-10GE4-Base, X460-G2-24p-GE4-Base, and X460-G2-24p-10GE4-Base with manufacturing revision code of 26 or greater
Note: Many X460-G2 models have an updated flash storage driver that requires either EXOS version 16.1.3.6-patch1-8 (or later) or version 21.1.1.4-patch1-5 (or later). This applies to the following models:

X460-G2-48x-10GE4 with manufacturing revision code of 12 or greater
X460-G2-24t-GE4, X460-G2-24t-10GE4, X460-G2-48t-GE4, X460-G2-48t-10GE4, and X460-G2-24x-10GE4 with manufacturing revision code of 14 or greater
X460-G2-24p-GE4, X460-G2-24p-10GE4, X460-G2-48p-GE4, and X460-G2-48p-10GE4 with manufacturing revision code of 15 or greater
To find out if your X460-G2 switch is affected, issue the command show version. The code appears in the first line of output (underlined in the following example):

X460G2-switch1 # show version
Switch : 800552-00-15 1516G-01191 Rev 1.0 BootROM: 1.0.1.8 IMG: 21.1.2.6

Table last updated 30 March 2018

X460-G2 Series ComponentMinimum EXOS Software VersionMinimum BootROM VersionLast Supported EXOS Software Version
X460-G2-48x-10GE4 X460-G2-24t-GE4 X460-G2-24t-10GE4 X460-G2-48t-GE4 X460-G2-48t-10GE4 X460-G2-24x-10GE4 X460-G2-24p-GE4 X460-G2-24p-10GE4 X460-G2-48p-GE4 X460-G2-48p-10GE415.6.1.41.0.2.1latest available
X460-G2-24t-24ht-10GE4 X460-G2-24p-24hp-10GE4 X460-G2-16mp-32p-10GE422.2.11.0.2.3latest available
VIM-2q VIM-2ss VIM-2t VIM-2x15.6.1.4N/Alatest available
TM-CLK Clock Module15.6.1.4N/Alatest available
X460-G2 Grounding LugN/AN/AN/A

X465 Switches: Software Support

Table last updated 25 February 2020
X465 Series ComponentMinimum EXOS Software VersionLast Supported EXOS Software Version
X465-48T X465-48P X465-48W X465-24MU X465-24MU-24W X465-24W30.2.1latest available
X465-24S X465-24XE X465i-48W30.5.1latest available

X480 Switches: Software Support

Table last updated 8 August 2016
X480 Series ComponentMinimum EXOS Software VersionMinimum BootROM VersionLast Supported EXOS Software Version
X480-24x X480-48t X480-48x12.4.12.0.0.916.x
VIM2-10G4X12.4.1N/A16.x
VIM2-SummitStack VIM2-SummitStack12812.4.1N/A16.x
VIM2-SummitStack-V8012.5.3N/A16.x
VIM3-40G4x15.1.2N/A16.x

X590 Switches: Software Support

Table last updated 6 September 2018

Note: The X590 switch is not compatible with ExtremeXOS version 30.1, but it is supported on ExtremeXOS version 30.2 and later.
X590 Series ComponentMinimum EXOS Software VersionLast Supported EXOS Software Version
all X590 switch models22.6.1latest available

X620 Switches: Software Support

Note: Some X620 switches require ExtremeXOS version 21.1.1.4-patch1-5 (or later), which includes a flash storage driver that is compatible with the hardware revision.

To find out if your X620 switch is affected, check its two-digit manufacturing revision code and compare it with the codes listed in the table below. To find the code, issue the command show version. The code appears in the first line of output (underlined in the following example):

X620-switch1 # show version
Switch : 800630-00-11 1516G-01191 Rev 1.0 BootROM: 1.0.1.8 IMG: 21.1.2.6

All EXOS 22.x (or later) images already have the necessary driver support.

Table last updated 7 September 2022
X460 Series ComponentMinimum EXOS Software VersionMinimum BootROM VersionLast Supported EXOS Software Version
X460-24t X460-24x X460-24p X460-48t X460-48x X460-48p12.5.12.0.1.016.x
SummitStack module SummitStack-V80 module12.5.12.0.1.016.x
XGM3-2sf12.5.1N/A16.x
XGM3S-2sf XGM3S-2xf XGM3SB-4sf15.1.1N/A16.x

X670 Switches: Software Support

Table last updated 8 August 2016
X670 Series Component (Part No.)Minimum EXOS Software VersionMinimum BootROM VersionLast Supported EXOS Software Version
X670-48x (800400-00 Rev. 05)12.6.12.0.1.216.x
X670-48x (800400-00 Rev. 06)15.1.12.0.1.216.x
X670V-48x (800399-00 Rev. 05)12.6.12.0.1.216.x
X670V-48x (800399-00 Rev. 06)15.1.12.0.1.216.x
X670V-48t (800518-00 Rev. 01)15.2.22.0.1.716.x
VIM4-40G4X (N/A)12.6.1N/A16.x

X670-G2 Switches: Software Support

Note: In addition to the minimum EXOS versions listed, this switch model is also supported on EXOS version 21.1.1 and later.

Note: If your X670-G2 switch’s manufacturing revision code is 14 or greater, you must install either ExtremeXOS version 16.1.3.6-patch1-8 (or later) or version 21.1.1.4-patch1-5 (or later). These software versions include a flash storage driver that is compatible with the hardware revision.

To find out if your X670-G2 switch is affected, check its two-digit manufacturing revision code. To find the code, issue the command show version. The code appears in the first line of output (underlined in the following example):

X670G2-switch1 # show version
Switch : 800546-00-14 1516G-01191 Rev 1.0 BootROM: 1.0.1.8 IMG: 21.1.2.6

All EXOS 16.2 images and all EXOS 22.x (or later) images already have the necessary driver support.

Table last updated 7 September 2022
X670-G2 Series ComponentMinimum EXOS Software VersionMinimum BootROM VersionLast Supported EXOS Software Version
all X670-G2 switch models15.6.1.41.0.2.131.7.x

X690 Switches: Software Support

Table last updated 7 September 2022
X690 Series ComponentMinimum EXOS Software VersionLast Supported EXOS Software Version
all X690 switch models22.3.131.7.x

X695 Switches: Software Support

Table last updated 2 April 2020

X770 Switches: Software Support

Table last updated 10 December 2019
X770 Series ComponentMinimum EXOS Software VersionMinimum BootROM VersionLast Supported EXOS Software Version
X770-32q15.4.1.32.0.2.122.x

X870 Switches: Software Support

Table last updated 7 September 2022
X870 Series ComponentMinimum EXOS Software VersionLast Supported EXOS Software Version
all X870 switch models22.2.1.531.7.x

V300 Port Extenders: Software Support

Table last updated 2 April 2020
V300 Port Extender ModelMinimum EXOS Software VersionLast Supported EXOS Software Version
V300-8P-2T-W30.2.2latest available
V300-8P-2X V300-8T-2X V300-HT-8P-2X V300-HT-8T-2X30.6latest available

V400 Port Extenders: Software Support

Table last updated 25 July 2018
V400 Port Extender ModelMinimum EXOS Software VersionLast Supported EXOS Software Version
all V400 models22.5latest available

E4G-Series Routers: Software Support

Table last updated 8 August 2016
E4G Series ComponentMinimum EXOS Software VersionMinimum BootROM VersionLast Supported EXOS Software Version
E4G-200 E4G-40015.1.12.0.1.616.x
E4G-200-12x15.2.22.0.1.716.x
E4G-200 CLK E4G-200 F16T1E1 XGM3S-2xf XGM3S-2sf XGM3SB-4sf E4G-B16T1E115.1.1N/A16.x
E4G-200-12x CLK E4G-200-12x F16T1E1 15.2.2N/A16.x