Contact UsContact UsContact Us

ISW-Series

Industrial Ethernet Switches

Designed for industrial use, Extreme Industrial Switches provide continuous uptime, manageability and operational efficiency.

  • Full Wire Speed Layer 2 Switching
  • All PoE ports IEEE 802.3af and 802.3at compliant and support up to 30W concurrently
  • Dual DC power input and Reverse power protection

Click to talk to a network expert

Request a Demo

Designed for industrial use, Extreme Industrial Switches provide continuous uptime, manageability and operational efficiency. With full PoE+ power per port, each switch offers the performance needed for todays power-hungry CCTV devices and WLAN access points.

Extreme Industrial Switches are an excellent choice for industrial environments, intelligent transportation systems, utilities, and smart cities. Full redundant ring technology creates fault-tolerant networks with high availability with industry standard technologies.

MODELS

  • 4 10/100 POE+ ports, 2 10/100 ports, and 2 100FX/1000Base-X SFP ports
  • 8 10/100 POE+ ports, and 4 100FX/1000Base-X SFP ports
  • 4 10/100/1000 POE+ ports, 2 10 10/100/1000 ports, and 2 100FX/1000Base-X SFP ports
  • 8 10/100 POE+ ports, and 4 100FX/1000Base-X SFP ports

PERFORMANCE

  • Full Wire Speed Layer 2 Switching
  • All PoE ports IEEE 802.3af and 802.3at compliant and support up to 30W concurrently
  • Dual DC power input & Reverse power protection
  • -40°C to +75°C operating temperature

FORM FACTOR

  • DIN Rail or Wall Mountable
  • Rugged IP30 Enclosure

FEATURES

  • Highly Resilient network redundant LACP, Spanning tree STP, RSTP & MSTP, and quick Ring fail-over protection
  • Port-based /tag-based VLAN, IEEE 802.1ad/QinQ VLAN, Add/remove VLAN tags
  • Multicasting support IGMP v1/v2, v3 proxy and snooping
  • Multicast/Broadcast/Flooding Storm Control
  • IEEE802.1x access control
  • Per VLAN mirroring
  • CLI/Web/SNMP management interfaces
  • PoE PSE power management and PD power consumption

OPERATING MODE

  • Store and forward, L2 wire-speed/non-blocking switching engine
  • MAC Addresses- 8K
  • Jumbo Frames- 9K Bytes

COPPER RJ45 PORTS

  • Speed- 10/100 Mbps or 10/100/1000 Mbps
  • MDI/MDIX Auto-Crossover
  • Auto-negotiation, full and half duplex
  • Ethernet Isolation- 1500VRMS 1 minute
  • All PoE ports IEEE 802.3af and 802.3at compliant and support up to 30W concurrently

PLUGGABLE SFP PORTS

  • 100FX SFP and 100/1000BaseX Transceiver

NETWORK REDUNDANCY

  • Fast Failover Ring Protection with single and multiple rings, ring coupling, dual homing and chain
  • IEEE 802.1D STP, IEEE 802.1w RSTP, IEEE 802.1s MSTP
  • Static trunk or Dynamic via LACP (Link Aggregation Control Protocol)

BRIDGING, VLANS, MULTICAST

  • Flow Control IEEE 802.3x (Full Duplex) and Back-Pressure (Half Duplex)
  • VLAN Capacity- 1024
  • Port-based VLANs; MAC-based VLANs; IP Subnet-based VLANs
  • Protocol-based VLANs
  • IEEE 802.1Q tag-based VLANs
  • IEEE 802.1ad Double Tagging (Q in Q)
  • IGMP v1, v2, v3 with up to 1000 multicast groups
  • IGMP snooping and querying
  • Immediate leave and leave proxy
  • Throttling and filtering
  • IEEE 802.1ab Link layer Discovery Protocol (LLDP)

TRAFFIC MANAGEMENT AND QOS

  • Priority- IEEE 802.1p QoS
  • Queues per port- 8
  • Scheduling – Strict, Weighted Round Robin
  • Port-based shaping

SECURITY

  • Port Security- IP and MAC-based access control, IEEE 802.1X authentication Network Access Control, RADIUS and TACACS+ AAA (Authentication, Accounting and Authorization)
  • Storm Control- Multicast/Broadcast/Flooding Storm Control

MANAGEMENT

  • CLI
  • GUI
  • SNMP v1, v2c, v3
  • Telnet
  • Management Security- HTTPs, SSH, RADIUS client for management
  • FTP- Configuration Import/Export, Firmware Upgrade
  • SYSLOG
  • Per VLAN mirroring
  • Ethernet Copper Diagnostics
  • DDMI for SFP ports
  • MIBs- RFC 1757 RMON 1,2,3,9; RFC 2674 Q-Bridge MIB, RFC-1213 MIB-II; RFC-1493 Bridge MIB; RFC 2233 IF MIB
  • DHCP- Client, Server, Relay, Snooping, Option 82
  • NTP and SNTP
  • PoE scheduling, power control, PoE PD power consumption

POWER

  • Redundant Input Terminals
  • Input voltage range- 46-58VDC (50-58VDC for optimal 30W PoE performance)
  • Reverse Power Protection
  • Transient Protection- >15K Watts peak
  • Power Consumption- 15 Watts without PD loading

LEDS

  • Power input status
  • Ethernet link and speed status